Need tihendiid tellime USA-st, need ei ole tootjate originaal, kuid väga kvaliteetsed ja kindlasti paremad, kui Hiina rihendid e-bayst, mis saab kilohinnaga
Orings_USA
-
FX 5111 laadimisklappi tihend
Sobivus: Enamik FX püssid 9mm laadimispordiga
See tihend on nr1 silindri leke põhjus ja suhteliselt lihtne vahetada.
-
HW100 regulaatori tihendikomplekt
Kõik tihendid, mis vaja vahetada Weichrauch HW100 rõhuregulaatori parandamisel.
Sisaldab:
2665D
2668
2674A
2674B
(1 tk iga)
-
Polyurethane O-ring AS568-007 (CO2)
AS568-007 U90 EU Polyether Urethane 90 Duro O-Ring
CO2-kindel o-rõngas mis sobib sinna kus tavaline kumm ei toimi (nt CO2 relvade klapid)
Sobib 4mm varrale
- 5/32"ID X 9/32"OD X 1/16"CS
- Actual: 0.145"ID X 0.070"CS
- Metric: 3.68mm ID X 1.78mm CS
Polyurethane: EU Polyether Urethane
General Purpose EU Polyurethane rubber is notable for its combination of hardness with elasticity, outstanding abrasion resistance and tear strength. Elastomeric urethane rubber, not to be confused with thermoplastic polyurethane, is often referred to as the "millable gum" urethane. Polyurethane is a moderately expensive material whose use is usually limited to applications that require its outstanding physical properties. Common end use applications are industrial seals, Air Guns, Paintball Markers, pneumatic applications, and other high dynamic applications.
Polyurethane (EU) Recommended uses:
- Mechanical Applications
- Wear Resistance
- Pure aliphatic hydrocarbons (propane, butane, fuel)
- Mineral oil and grease
- Silicone oil and grease
- Water up to +50°C (EU type only)
- Ozone and aging resistant.
Polyurethane (EU) is Not Recommended for:
- Ketones, esters, ethers, alcohols, glycols
- Hot Water above 40°C and Water Vapor
- Dilute Alkalis and Acids
- Amines
- Refined Mineral Oils
- Organic Solvents such as Acetone
Operating temperature: -34° to +80°C
-
SuperLube o-ring / PCP määre 1cc
Ühekordses 1cc pakkis SuperLube PTFE sünteetiline määre PCP relvade tihenditele ja metallosadele
Mugavas ühekordses pakendis
Sobib: o-rõngaste (sh kõrge rõju all), tihendite määrimiseks (nt PCP tihendid, laadimisotsad, pumbad, pudelid jne); laagrite ja liigutavate osade (nt kuulilükkaja) märimiseks
Kaitseb kulumisest ja korrosioonist. Sobib kokku NBR, PU, FKM o-rõngastele.
Töötemperatuurid -43°C to 232°C
NB! Hind ühele kottile.